Pelican on a bicycle · glm-5.3-flash
Output generated Cost / run $0.0019 Runtime 128.6s
Prompt for this run
Build a single-page illustration whose main content is an inline SVG of a pelican riding a bicycle. Use HTML, CSS, and JavaScript as needed. Write it to `index.html` in the current working directory using your file tools. Inline your own CSS and JavaScript. Do not use external assets, CDNs, or network requests. No third-party libraries are provided. Required behavior: - Make the pelican recognizable through its long bill with a throat pouch, body, wings, and feet. Show it in a plausible riding pose with feet near the pedals and a wing or other clear contact near the handlebars. - Make the bicycle recognizable through two wheels, a connected frame, handlebars, saddle, and pedals. Keep the bird and bicycle visually connected rather than floating apart. - Draw the illustration with SVG shapes and paths embedded in index.html. Do not use an external image or a raster image embedded inside the SVG. - Keep the complete subject visible with a suitable viewBox and responsive sizing. Include an SVG title or accessible description. - Choose the art style, colors, background, and composition freely. Animation and interactive controls are not required. Verify: Inspect the complete illustration for a recognizable pelican, connected bicycle geometry, a riding pose, and unclipped framing. Check that the main artwork consists of inline SVG shapes and paths and has an accessible title or description.
TAKE IT TO CODE
A single self-contained HTML file — copy it and open in any browser, or reuse the prompt with your own pi-agent run.
RUN
METRICS
Transcript · 19 messages
Build a single-page illustration whose main content is an inline SVG of a pelican riding a bicycle. Use HTML, CSS, and JavaScript as needed. Write it to `index.html` in the current working directory using your file tools. Inline your own CSS and JavaScript. Do not use external assets, CDNs, or network requests. No third-party libraries are provided. Required behavior: - Make the pelican recognizable through its long bill with a throat pouch, body, wings, and feet. Show it in a plausible riding pose with feet near the pedals and a wing or other clear contact near the handlebars. - Make the bicycle recognizable through two wheels, a connected frame, handlebars, saddle, and pedals. Keep the bird and bicycle visually connected rather than floating apart. - Draw the illustration with SVG shapes and paths embedded in index.html. Do not use an external image or a raster image embedded inside the SVG. - Keep the complete subject visible with a suitable viewBox and responsive sizing. Include an SVG title or accessible description. - Choose the art style, colors, background, and composition freely. Animation and interactive controls are not required. Verify: Inspect the complete illustration for a recognizable pelican, connected bicycle geometry, a riding pose, and unclipped framing. Check that the main artwork consists of inline SVG shapes and paths and has an accessible title or description.
index.html (6426 bytes)Successfully wrote to index.html
{"action":"screenshot"}Frame 1, +0ms
[Browser image supplied to model]
{"console":["warning: An iframe which has both allow-scripts and allow-same-origin for its sandbox attribute can escape its sandboxing."],"dom":"A Pelican Out for a Ride\n\nPedal, pedal, glide!","images":"attached"}
thinking
Issues: bill pouch hidden (bill drawn over pouch—pouch barely visible below bill, actually pouch visible a bit). The head/neck looks decent. Wing points down-right oddly; handlebar partially hidden behind wing, but okay. Main problems: legs look like one leg going down past pedal; foot placement off; wing shape poor. Let me improve: wing pointing to handlebar more clearly upward, legs/feet on pedals better, pouch more visible (draw pouch below bill in orange darker, wider). Also bird sits too high—saddle missing under bird. Saddle is hidden behind body. Fine. Fix edits: pouch drawn after bill with darker fill and bigger. Wing: reshape to curve up-right toward handlebar at (486,266). Legs: adjust to pedals at (359,412) and (320,356).
The layout works but the wing-to-handlebar connection and foot-on-pedal poses are sloppy, and the pouch is barely visible. Let me refine those.
{"edits":[{"newText":" <!-- near wing reaching to handlebars -->\n <path d=\"M380 240\n C 400 218 442 210 472 228\n Successfully replaced 4 block(s) in index.html.
{"action":"reload"}Frame 1, +0ms
[Browser image supplied to model]
{"console":["warning: An iframe which has both allow-scripts and allow-same-origin for its sandbox attribute can escape its sandboxing."],"dom":"A Pelican Out for a Ride\n\nPedal, pedal, glide!","images":"attached"}
thinking
The wing still looks like a small folded blob, not reaching the handlebars; the handlebar is behind the front wheel spokes oddly — actually the handlebar stem at (440,290) sits above the wheel hub, but the frame's fork line goes 440,340 to 440,290, fine, but handlebars look tiny. The wing doesn't reach the handlebar visually. Also the far foot near chainring looks odd. Improvements: extend wing tip to touch handlebar grip at ~(495,285). Widen handlebar. Move wing so tip overlaps grip. Also move handlebars up/left a bit so wing can reach: stem from fork top (440,290) to grip at (495,275). The wing currently ends around x=488,y=254 — close but the handlebar drawn before the wing, so wing covers it; wing tip at 488,254 vs grip ~498,288. Extend wing tip down-right. Let me just reshape wing to reach (496,280), and raise handlebar grip.
The wing still doesn't visibly reach the handlebars. I'll extend it to the grip.
{"edits":[{"newText":" <path d=\"M440 290 C 450 274 466 266 484 268 C 498 270 506 280 504 292 L 492 296 C 488 284 476 280 464 282\"\n Successfully replaced 2 block(s) in index.html.
{"action":"reload"}Frame 1, +0ms
[Browser image supplied to model]
{"console":["warning: An iframe which has both allow-scripts and allow-same-origin for its sandbox attribute can escape its sandboxing."],"dom":"A Pelican Out for a Ride\n\nPedal, pedal, glide!","images":"attached"}
thinking
Better—wing now overlaps the grip area. The wing tip extends past the grip slightly, covering it with white. Acceptable; the wing clearly contacts the handlebar. Remaining minor: far foot near chainring looks like an orange blob on chainring; could hide it or shift. Legs look a bit stubby but plausible. Overall good enough. One tweak: move far foot up-left slightly? It's at the upper pedal (320,356), overlapping the chainring area. It reads okay. Also the wing covers the grip; the grip is barely visible. Fine. I'd call it done. Maybe reduce wing tip so the grip shows. Quick tweak: end wing at x=486.
The composition reads well now. One last tweak so the handlebar grip peeks out from under the wing tip:
{"edits":[{"newText":" C 492 234 500 256 497 278\n C 491 284 485 286 479 284\n C 468 266 455 255 441 251Successfully replaced 1 block(s) in index.html.
{"action":"reload"}Frame 1, +0ms
[Browser image supplied to model]
{"console":["warning: An iframe which has both allow-scripts and allow-same-origin for its sandbox attribute can escape its sandboxing."],"dom":"A Pelican Out for a Ride\n\nPedal, pedal, glide!","images":"attached"}
thinking
Good enough. Done. Report.
Done. The illustration is complete in `index.html`. **What it contains:** - Inline SVG (viewBox `0 0 640 480`) with `<title>` and `<desc>` for accessibility, responsive sizing via `width: min(90vw, 640px)`. - **Pelican**: long orange bill with a hanging throat pouch, round body, S-curved neck, two wing shapes (one clearly extending to the handlebar grip), two orange legs with webbed feet resting on both pedals, and tail feathers over the rear wheel. - **Bicycle**: two spoked wheels, a connected blue frame (chainstays, seat tube, down tube, fork), handlebars with grip, saddle (under the bird's body), crank with chainring, chain, and pedals at both crank positions. **Verified in the browser:** full scene renders unclipped, no console errors, pelican features (bill/pouch/eye/feet) are recognizable, the wing visibly contacts the handlebar, feet sit on both pedals, and the bird's body overlaps the saddle/frame so bird and bike are connected. Only static rendering was checked — no interactivity was required or tested.